RBR MACH I Combat Helmet

Back

RBR MACH I Combat Helmet
Contact us by e-mail

The RBR MACH I Combat Helmet, similar the ACH 2000, was designed in the advanced combat (ACH) style and delivers full IIIA performance exceeding the standard issue.

Features:

Weight: 2.7lbs - 3.0 lbs
Sizes: Medium (Up to 7 1/4") & Large (7 1/4" and above)
Tested to H.P. White helmet test procedure for IIIA performance (HPW-TP-0401.01B)
Tested to MIL-STD 662E for fragmentation performance
4-Point Comfort Plus suspension system
Optional Mil-Spec multi-pad suspension system capable
Full coverage ACH style
Tested and certified by H.P. White Labs withstanding multiple impact IIIA ballistics
V-50 Performance exceeds 2100 FPS
Colors: Black, Olive Drab and Tan
One and three hole NVG mounting configurations available

The RBR MACH I BALLISTIC HELMET is based on the original ACH MICH Design with a focus toward reduction in weight while maintaining coverage area and increasing comfort. The MACH I was designed where compatibility with all NOD and communication systems are of critical importance. The MACH I includes the RBR 4-point suspension system secured with only four bolts to ensure maximum ballistic integrity, comfort and stability. The RBR Mach I is fitted with a fully adjustable head harness. The head harness includes leather covered front padding, nylon covered rear padding and leather comfort crown pad. RBR Helmets are fully adjustable in the circumference as well as the wearing height, therefore, two sizes can be adjusted to fit all heads.

webassets/RBR_comfortplus.JPG

Comfort Plus Helmet Suspenion System

RBR Ballistic Helmets are tested at H.P. White Laboratory at Level IIIA. Helmets are tested versus penetration and back face deformation of Level IIIA 9mm and .44 Magnum ammunition, to the HP White Helmet Test Procedure (HPW-TP-0401.01B) Additionally, This test requires that one of each of the above rounds must impact directly on a suspension system fastener resulting in zero penetration. The entire line of helmets from RBR Tactical, have been further tested to MIL_STD 662E for fragmentation performance. All of the RBR Helmets maintain V-50 performance at over 2100 feet per second, surpassing the Mil Spec of 2000 feet per second. RBR Test Results are available upon request.

Testing is Critical to Performance! Commonly found misconceptions include NIJ Certified IIIA helmets. The NIJ Certification for helmets only provides for testing up to level II, and does not measure back face deformation. Likewise, Level IIIA Testing to NIJ Standard 0108.01 for Ballistic Material is for testing flat armor panels only, and specifically excludes helmets from being tested to this standard. RBR is confident that the HP White Helmet Test Procedure is the most comprehensive helmet test standard currently available. Helmets that cannot meet the requirements of this Level IIIA test should be considered substandard.

Optional Mil-Spec pad system and 4 point chin strap configuration
Price $425

SKYDEX ACH Pads $85
Item #MACH I

Price: ~~$500.00~~ Sale price $389.00